Posts Tagged ‘NiCad’
Porter-Cable 9845 Saw Boss 19.2-Volt Ni-Cad 6-Inch Cordless Circular Saw Overview
The Porter-Cable Saw Boss, a 19.2-volt cordless circular saw, is an increasingly popular alternative to standard corded circular saws. Though not as powerful as its corded cousin, it’s extremely easy to move around a job site, and in instances where power is not readily available, it can help avoid the necessity of a generator or multiple extension cords. This model uses 6-inch blades and comes with a premium 6-inch thin-kerf 18-tooth carbide-tipped Riptide blade. It will do up to 3,250 rpm, and makes up to 100 crosscuts on two-by-four material on a single charge. It cuts two-by lumber in a single pass, even at a 45-degree bevel, and also has an easy-to-adjust guide plate for both bevel and depth of cut. The dust nozzle is very convenient and allows you to direct dust at any angle around the saw. We found that this Porter-Cable felt quite solid without being too heavy. It’s well balanced and well configured for ease of use. This kit comes with one ni-cad rechargeable battery and a diagnostic charger with an LED warning system. The battery is interchangeable and will work with other Porter-Cable 19.2-volt tools. It charges in less then an hour and provides plenty of run time for most types of use. The battery also has a unique slide-in loading system in the base of each tool that makes battery attachment extremely tight and almost impervious to wear. Also included in the kit is a custom-molded plastic carrying case. –Jonathon Tudor
*** Product Information and Prices Stored: Jul 10, 2011 03:15:11
Useful Link : Cordless Saw
Tags: 1499, 192Volt, 2Piece, 6Inch, Bouquet, Circular, Cordless, Flower, NiCad, PorterCable
Posted in Cordless Circular Saws | Comments Off
Bare-Tool Milwaukee 6515-20 Sawzall 18-Volt Ni-Cad Cordless Reciprocating Saw (Tool Only, No Battery) Feature
- Powerful 18-volt rare earth motor
- 1-inch stroke length; trigger speed control 0-2000 SPM
- All-metal keyless blade clamp
- Battery works with all Milwaukee 18-volt Power-Plus tools
- Limited warranty, 30-day no-risk trial
Bare-Tool Milwaukee 6515-20 Sawzall 18-Volt Ni-Cad Cordless Reciprocating Saw (Tool Only, No Battery) Overview
This Sawzall is an effective cordless version of Milwaukee’s famous corded reciprocating saw. It has a 1-inch stroke with a variable-speed trigger that provides 0 to 2,000 spm. It also features Milwaukee’s quick-locking, steel blade-clamp system for fast and easy tool-free blade changing. As a cordless saw, it’s great for electricians, plumbers, contractors, demolition experts, or anyone else who wants the freedom to cut through wood or metal quickly without being tethered by a cord. This saw cuts quickly and relatively smoothly for a reciprocating saw, and the 2 amp hr battery offers plenty of run time for most jobs. While the cordless Sawzall does seem to have a relatively low level of vibration, we wish it had a soft-cushion grip on the rear handle. That said, this is unquestionably a tough, effective saw, capable of most any job a corded reciprocating saw can do. –Brian Trinen
Related Products
*** Product Information and Prices Stored: Jun 22, 2011 01:30:06
Useful Link : Cordless Saw
Tags: 18Volt, 651520, BareTool, Battery, Cordless, Milwaukee, NiCad, Reciprocating, Sawzall
Posted in Cordless Reciprocating Saws | Comments Off
DeWALT DC385K 18-Volt Ni-Cad Cordless Reciprocating Saw Kit Feature
- Lever-action keyless blade clamp for quick and easy blade changes and 4-positions for flush cutting
- 1-1/8-inch stroke length and 0-3,000 strokes per minute for faster cutting speed; pivoting shoe for comfort
- high-capacity XRP battery offer 40% more run-time than standard batteries
- Includes saw, battery, 1-hour charger, kit box
- 8.2 pounds; 90-day money back guarantee, 1-year free service contract, 3-year limited warranty
DeWALT DC385K 18-Volt Ni-Cad Cordless Reciprocating Saw Kit Overview
The DEWALT 18-Volt Cordless XRP Ni-Cad Reciprocating Saw Kit will help you make quick work of demolition tasks involved in renovations and remodels. Featuring variable-speed trigger, and a powerful DEWALT XRP extended run-time battery system, this saw is built for control and power. The kit includes a quick one-hour charger, 18 volt XRP battery, and handy carrying kit box so you can recharge and be back at it in no time.
 |
18-Volt Cordless XRP Reciprocating Saw Kit
At a Glance:
- Variable-speed control delivers 0 to 3,000 spm for accuracy
- Extended 1-1/8-inch stroke length for faster cuts<
- Balanced, lightweight design with comfort grip
- Fast, keyless blade changes
- Reduced downtime with 18-volt XRP extended run-time battery
- Three-year limited warranty, one-year free service, and 90-day money-back guarantee
|
|
 |
|
Take on renovation and remodeling projects with this powerful reciprocating saw.
View larger. |
Variable-speed saw blade delivers
3,000 spm, ideal for framing jobs.
View larger. |
Variable-Speed Control for Fast, Accurate Cuts
A reciprocation saw mimics the back-and-forth motion of a handsaw that lets you quickly cut through wood framing, shingles, PVC pipes, and more. Plus a reciprocating saw fits into places where other saws can’t go, making it a truly versatile addition to your professional tool kit.
A DEWALT cordless reciprocating saw helps you capitalize on all those benefits, thanks to the fast cutting speeds allowed by its powerful, 18-volt motor and big 1-1/8-inch stroke length. This saw offers variable-speed control for application-specific performance, and it is capable of operating at speeds ranging from 0 to 3,000 spm. When you’re finished with a cut, the saw’s electric brake stops the blade quickly and reliably.
Three-position
adjustable shoe. |
Versatile, Convenient Blade Clamp and Shoe Design
For versatility, the saw’s four-position blade clamp allows you to choose the configuration that best matches your application, and the blade clamp is reinforced with metal for long-term durability. This setup gives you the ability to make flush cuts and the ability to reverse the blade for cutting upside-down, and–regardless of which configuration you’re using–the saw’s pivoting, open-top shoe makes it easy to see what you’re working on. The three-position shoe also makes adjusting cut depth easy and helps extend blade life.
Fast, Keyless Blade Changes
When it comes time to switch to a different type of blade or replace a blade with a fresh one, the keyless lever-action blade-clamp design allows for fast, easy blade changes–no special tools required.
Comfort Grip and Long Battery Life
Since comfortable handling contributes to better control and accurate cuts, this saw weighs an easy-to-maneuver 8.2 pounds and features a textured, anti-slip grip. The variable speed trigger provides consistent performance and improved user control in extended use situations.
A tool’s only useful if it runs long enough to get the job done, and DEWALT XRP extended run-time batteries keep this reciprocating saw running at full tilt. They provide up to 40 percent more run-time than standard batteries, and any XRP battery can be used with any 18-volt DEWALT tool, which allows you to streamline your kit. In addition, the one-hour charger helps reduce downtime so you can get your task done quickly.
This 18-volt cordless XRP reciprocating saw kit also comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money back guarantee.
What’s in the Box
DC385K DEWALT 18-Volt Cordless XRP Reciprocating Saw, one-hour Ni-Cad charger, 18-volt XRP battery, and kit box.
Four-position blade change. |
Keyless blade-change lever. |
Related Products
*** Product Information and Prices Stored: Jun 17, 2011 08:13:11
Tags : Cordless Saw
Tags: 17599, 18Volt, Cordless, DC385K, DeWALT, NiCad, Reciprocating
Posted in Cordless Chain Saws | Comments Off
Hitachi UC14YFA Universal Charger 7.2 Volt to 14 Volt Ni-Cad and Ni-Metal Batteries Feature
- 7.2v – 14.4v Battery Charger
- Ni-Cd and Ni-MH
- Universal
Hitachi UC14YFA Universal Charger 7.2 Volt to 14 Volt Ni-Cad and Ni-Metal Batteries Overview
Hitachi UC14YFA Universal Charger 7.2 Volt to 14 Volt Ni-Cad and Ni-Metal BatteriesTechnology is the common thread behind the Hitachi brand. It’s what makes Hitachi products superior in design and durability. From its birth, Hitachi has pioneered innovative technologies that have improved lives around the world. This knowledge is shared across all Hitachi divisions worldwide and is incorporated into applications that benefit many different products.Hitachi UC14YFA Universal Charger 7.2 Volt to 14 Volt Ni-Cad and Ni-Metal Batteries Features:; 7.2v – 14.4v Battery Charger; Ni-Cd and Ni-MH; Universal
*** Product Information and Prices Stored: May 05, 2011 06:12:24
Related : Cordless Saw
Tags: 4649, Batteries, Charger, Hitachi, NiCad, NiMetal, UC14YFA, Universal, Vitamins
Posted in Battery Chargers | Comments Off
It looks dated compared to the cordless tools of today, but this shouldn’t stop you from getting one. This reciprocating saw gets more use then my 18volt and corded sawzalls. It’s lightweight and less bulky, and it’ll cut just about anything – wood, metal, plastic, etc. This little guy will cut a 2×4 if you really need it to. I’ve used it many times to notch out lumber. The trick is to brace the tool with it’s fence or just hold it firmly. And don’t be dissuaded by the 9.6 volts. This baby will cut and cut. It’s a very efficient design. The wood cutting blade is great, but the metal blade is prone to breaking. The saw does show its age with the hex screw that holds down the blade, and so changing blades is not as fast as modern jigsaws. I’m in the trades so I personally own two – each ready with the correct blade. might seem high for the do-it-yourself’er, but do you really want to get crankin with a hand saw? It’ll pay for itself in the time savings. This is simply a great all around cutter.
Bare-Tool Makita 4390D 9.6-Volt Ni-Cad Cordless Reciprocating Saw (Tool Only, No Battery) Feature
- Small, compact and lightweight yet powerful enough to cut wood, mild steel and more
- 9/16-inch stroke and 2,700 SPM for fast, smooth and efficient cutting
- Lock off switch helps prevent accidental starts; utilizes most 9.6-Volt Makita batteries and chargers (sold separately)
- Uses special blade for maximum efficiency
- 1-year warranty
Bare-Tool Makita 4390D 9.6-Volt Ni-Cad Cordless Reciprocating Saw (Tool Only, No Battery) Overview
Compact and lightweight reciprocating saw delivers a 9/16in. stroke 2700 times per minute for a fast, smooth and efficient cut. Cuts wood, mild steel and more. Tool only; battery and charger sold separately (see Item# 1591826 for complete kit). Cordless: Yes, Volts: 9.6, Amps: 1.3, Stroke Length (in.): 9/16, Strokes Per Minute (SPM): 2,700, Tool Weight (lbs.): 3.1, Battery Included: No, Charger Included: No, Case Included: No
Related Products
Customer Reviews
tiny dancer – Steven M. Kessler –
i love this tool, it is great when you need to trim something small, wood or a metal threshold or cut a bolt. the hack saw blades are well made. i have also used it for cutting baseboard on the wall. it is slow enough to control.. good tool for me, thanks makita
Get the version with battery and charger – A. Scales –
I bought this baretool then I discovered Amazon has the same tool with battery and charger for the same price. And both are Amazon Prime. Hmm. Which should you buy?
*** Product Information and Prices Stored: Sep 03, 2010 01:00:50
See Also : Cordless Saw
Tags: 7899, 96Volt, BareTool, Battery, Choosing, Cordless, Information, Makita, Manchester, NiCad, Reciprocating, skateboard, Terrier
Posted in Cordless Reciprocating Saws | Comments Off
